How to thaw your frozen pipes

You wake up one winter day and start shoveling snow from the entrance…in Texas? It has been a hard frost season and the only thing you want right now is a hot cup of tea. You turn on a faucet for water and… only a few drops come out. Turns out, you’ve got frozen pipes.

This can be extremely dangerous for your pipes, as water expands and makes the tubes burst if measures are not taken soon. If you find yourself with your water pipelines already frozen, don’t panic! We will show you some things you can do to solve this problem with no damage.

To begin with, open the faucet and let the water run out. This will help melt the ice in the pipes. Plus, keeping the water flowing can prevent it from freezing again.

You can also apply heat to the pipes with a hairdryer, heating pads or towels soaked in hot water to melt the ice inside. This is a particularly good measure to restore water pressure as soon as possible. Just keep applying heat until water pressure is fully restored. But be careful, never apply a direct flame on the pipes or they will get damaged!

If you have done the last two things for a while and water pressure does not come back to normal, maybe there is another connected pipeline that is still frozen. Try locating it by following the pipeline system and opening the faucets that connect with each section to find the source of the problem.

If there are any hard-to-reach pipes, the best option is to call an expert. Licensed plumbers are certified and trained to help you solve this issues and it is better to call a professional when things get particularly complicated.

These are just some tips you can use to take out the harsh winter away from your in-door water system. Nevertheless, most of these problems can be avoided if your pipelines are properly insulated and protected against low temperatures.

Do you want to insulate your home or repair an already burst pipe? We are here to help. Contact us now to protect or repair your frozen pipes!

A quick guide to avoid frozen pipes

Every year winter comes and wreaks havoc on running water systems across the country, but particularly true this year in Texas with the historically low, freezing temperatures have resulted in a lot of frozen pipes.

The water in the pipes ends up freezing, cutting our supply and damaging the pipes itself. Since water expands when it freezes, this puts pressure on the pipelines and even causes them to burst, creating a big problem for your house (and your pocket).

To avoid any complications in your house, here is a quick guide of what to take into account to avoid this problem and keep your running water system in shape!

How to avoid frozen pipes

The first thing to do is to properly drain any water from the lines outside the house. Pipes outside are particularly susceptible to bursting, such as those of the sprinklers and swimming pool lines. While doing this, it is also advisable to remove any hose from outside, drain them, store them for the winter and leave the valves outside open to allow the water to expand without damaging the pipe.

After finishing with the outside part of the house, let’s turn to the interior. A good first step is to insulate all your in-door pipelines. This includes pipes in the attic, crawl spaces, basements and garages. You can also install products made to insulate the pipes even further such as “pipe sleeves” or UL-listed heat tape and heat cables. This will protect your water systems from low temperatures, making it more resistant to freezing.

Nevertheless, you will also have to take some daily actions to ensure your inner pipelines don’t get damaged by the temperature. It is important to close any doors leading to the outside of the house to avoid the heat from escaping- Also, open the kitchen and bathroom cabinets to let the warm air circulate close to the pipelines.

Another good tip, though it might increase your heating bill a little, is to keep your thermostat at the same temperature throughout the whole day. This is particularly important if you decide to go out on vacations during winter, since unsupervised pipelines are more prone to freeze and burst if the heater is not regulating temperature constantly. Just remember that some extra bucks in the heating bill are way better than a bill for a broken or frozen pipe.

It is also good to look for any leakages and reparations to do in the house. Remember that leaking water in the pipe, when it comes in small quantities, is prone to freezing and damaging the pipelines. For more info, read How to thaw your frozen pipes here.

These are just some guidelines to keep your pipelines protected from the harsh winter. You can do many of these things by yourself, but it means time and some procedures like insulating the pipelines are susceptible to human error but you don’t need to worry, in ProTech we are experts in frozen pipes repairing. Just call us at 281-933-3330 to get your frozen pipes repared in Texas and schedule your appointment!